U.S. flag

An official website of the United States government

Frequently Asked Questions

Frequently Asked Questions are used to provide additional information and/or statutory guidance not found in State Medicaid Director Letters, State Health Official Letters, or CMCS Informational Bulletins. The different sets of FAQs as originally released can be accessed below.

Showing 1 to 4 of 4 results

Should the rate of required exclusions be reported with the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure's Part 1 performance rate?

The measure excludes plan members who are not ambulatory from the measure rate, but it is not necessary to report the number of members excluded with the measure’s performance rate.

FAQ ID:89006

SHARE URL

Is a specific screening tool required for the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure?

No, a specific screening tool is not required for this measure. However, potential screening tools may include the Morse Fall Scale and timed Get-Up-And-Go test.

FAQ ID:89011

SHARE URL

What is the difference between a screening (Part 1) and a risk assessment (Part 2) for the purposes of calculating the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure?

A falls screening is an evaluation of whether a Managed Long Term Services and Supports plan member has experienced a history of falls and/or problems with balance or gait. A falls risk assessment includes a balance/gait assessment and one other assessment component and should only be performed for members with a documented history of falls (at least two falls or one fall with injury in the past year).

FAQ ID:89016

SHARE URL

Does CMS require states to submit their 2019 Upper Payment Limit (UPL) demonstrations using the Office of Management and Budget (OMB) approved templates for Inpatient Hospital services (IPH), Outpatient Hospital services (OPH), and Nursing Facility services (NF) UPLs?

Yes, CMS requires states to use all of the OMB approved templates for their 2019 (07/01/2018 to 06/30/2019) UPL demonstrations submitted to meet the annual UPL reporting requirement and with State Plan Amendment (SPA) submissions. When submitting UPL demonstrations, use the following naming convention: UPL_<UPL Demo Date Range>_<Service Type Abbreviation>_R<Region Number>_<State Abbreviation>_<Workbook Number>.xls. Here is an example of the naming convention: UPL_20170701-20180630_IP_R01_CT_01.xls.

FAQ ID:92196

SHARE URL
Results per page