Frequently Asked Questions

Annually, CMS will request a list of covered durable medical equipment HCPCS codes from the Medicare Pricing, Data Analysis and Coding Contractor. Once the list is received, CMS will distribute the list through the CMS Regional Office Associate Regional Administrator.

FAQ ID:93671

To address claims run-out and ensure compliance with the FFP limit, we recommend states with these concerns conduct interim FFP limit demonstrations for DME no later than three months after the end of the calendar year for the previous calendar year (that is, January 1-December 31). The interim DME FFP limit demonstration will be due by March 31 of each calendar year and will contain data for the period of January 1 to December 31 of the preceding year. The final demonstration would be due one year later on March 31 and include all claims received during the run-out period dates of service within the interim demonstration period. The interim demonstration process should provide states with an understanding of potential violations of the FFP to make any necessary budgeting and rate changes. This method is being used to allow provide for a reasonable claims run out period as allowed under 42 CFR 424.44, which states that claims must be filed no later than one calendar year after the date of service.

FAQ ID:93676

Federal financial participation (FFP) limit demonstrations for durable medical equipment (DME) will be due 3 months after the end of the calendar year for the previous calendar year (i.e., January 1-December 31). The first DME FFP limit demonstration will be due by March 31, 2019 and will contain data for the period of January 1, 2018 to December 31, 2018. This reporting period was selected to coincide with the effective date of the statute (January 1, 2018).

FAQ ID:93486

The statute does not compel states to set their payment rates for durable medical equipment (DME) at specific Medicare rates for each specific item. Instead, the statute applies a limit on available federal financial participation (FFP) for state aggregate expenditures. States have the flexibility to set their own rates for DME in the Medicaid program. If a state decides to set their Medicaid payment rates at or below Medicare rates in the state plan, the state should be specific about the fee schedule the state will use and be prepared to demonstrate that their rates do not exceed the amount Medicare would have paid in the aggregate, in order to avoid the annual FFP limit demonstration of aggregate expenditures. For the demonstration, the Centers for Medicare & Medicaid Services (CMS) will be using state-specific Medicare payment rates. With this limit of available FFP for the aggregate amount of DME, CMS will use either the Medicare rates specific to an area of the state for the services rendered in those areas, or the lowest of a state’s Medicare rates for comparison to the aggregate limit of FFP.

FAQ ID:93491

States are free to establish higher rates for particular items of DME if they determine that higher rates are needed under the Medicaid state plans. If, however, the aggregate expenditures would exceed the Medicare rates in the aggregate, federal financial participation (FFP) would be limited. States that determine that payments above Medicare aggregate totals are necessary may use state-funds to obtain particular items of DME. The statute specifically describes an aggregate limit on state expenditures only for purposes of paying FFP. Therefore, a state may pay more than the Medicare rate for a particular item of DME, and as long as the aggregate amount for all DME is not exceeded, no FFP is at risk. Even if the aggregate amount is exceeded, there is only a limit on FFP, and there is no limit on the use of state funds used on DME items.

FAQ ID:93496

The Centers for Medicare & Medicaid Services cannot delay implementation of the statute. Congress took specific action to move the effective date up to January 1, 2018, and we are unable to amend the effective date.

FAQ ID:93501

The limit on FFP is the total aggregate amount for all relevant DME subject to the limit described in Section 1903(i)(27) of the Act.

FAQ ID:93506

The guidance document references 42 CFR 414.202. The regulation defines “durable medical equipment” as equipment, furnished by a supplier or a home health agency that meets the following conditions:

• Can withstand repeated use
• Effective with respect to items classified as DME after January 1, 2012, has an expected life of at least three years
• Is primarily and customarily used to serve a medical purpose
• Generally is not useful to an individual in the absence of an illness or injury
• Is appropriate for use in the home

FAQ ID:93511

Medicare payment amounts for durable medical equipment (DME) are available through CMS.gov (https://www.cms.gov/Medicare/Medicare-Fee-for-Service-Payment/DMEPOSFeeSched/DMEPOS-Fee-Schedule.html) and through DMECompetitiveBid.com, which is the Medicare website for the competitive bidding program. States may access the appropriate information through these resources, or upon request through MedicaidDME@cms.hhs.gov.

FAQ ID:93516

For technical assistance with the implementation efforts and assistance with determining if current state practices are below the FFP limit, please contact the Medicaid DME mailbox: MedicaidDME@cms.hhs.gov.

FAQ ID:93476