Frequently Asked Questions are used to provide additional information and/or statutory guidance not found in State Medicaid Director Letters, State Health Official Letters, or CMCS Informational Bulletins. The different sets of FAQs as originally released can be accessed below.
Frequently Asked Questions
Which are the Managed Long Term Services and Supports (MLTSS) assessment and care planning measures?
The MLTSS assessment and care planning measures include:
- LTSS Comprehensive Assessment and Update
- LTSS Comprehensive Care Plan and Update
- LTSS Shared Care Plan with Primary Care Practitioner(PCP)
- LTSS Reassessment/Care Plan Update after Inpatient Discharge
- Screening, Risk Assessment, and Plan of Care to Prevent Future Falls: Falls Part 1 (Screening) and Falls Part 2 (Risk Assessment and Plan of Care)
FAQ ID:89066
SHARE URLShould states require plans to report both the core and supplemental rates for the Managed Long Term Services and Supports (MLTSS) LTSS Comprehensive Assessment and Update, LTSS Comprehensive Care Plan and Update measures, and LTSS Reassessment/Care Plan Update After Inpatient Discharge measures?
It is recommended that MLTSS plans report both rates. However, if the state believes there are valid reasons for not reporting both rates, such as costly changes in assessment and care planning forms and information technology systems, it might consider phasing in the supplemental rates over time. For instance, in the first year of measure use (for example, measurement year 2018), the state could require MLTSS plans to report just the core rate, and then require that MLTSS plans report both core and supplemental rates for measurement year 2019 or 2020. Although they are called "supplemental rates," they are still very important, and should be viewed as "aspirational." MLTSS plans should strive to cover more assessment and care plan elements over time.
FAQ ID:89071
SHARE URLDo I need value sets to calculate any of the five the Managed Long Term Services and Supports (MLTSS) assessment and care planning measures? If so, where can I find the value sets?
Value sets are the complete set of procedure and diagnostic codes used to identify a service or condition included in a measure. One of the assessment and care planning measures—LTSS Reassessment/Care Plan Update after Inpatient Discharge—uses value sets to identify potentially planned hospitalizations. Please see "Do I need to use value sets to calculate these measures? If so, where can I find the value sets?" for more information regarding using value sets for the three institutional rebalancing and utilization measures.
View the value sets (XLSX, 2.88 MB). Please see Table 2 in the "LTSS Value Sets to Codes" tab. Table 1 in the "LTSS Measures to Value Sets" tab shows each value set needed for each measure.
FAQ ID:89076
SHARE URLCan I use the same sample for the Managed Long Term Services and Supports (MLTSS) Part 1 of the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure as the LTSS Comprehensive Assessment and Update, LTSS Comprehensive Care Plan and Update, LTSS Shared Care Plan with Primary Care Practitioner, and LTSS Reassessment/Care Plan Update after Inpatient Discharge measures?
Yes, the same sample can be used for Part 1 of the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure as the LTSS Comprehensive Assessment and Update, LTSS Comprehensive Care Plan and Update, and LTSS Shared Care Plan with Primary Care Practitioner measures.
FAQ ID:89081
SHARE URLCan a state type information and data into unlocked fields in the Upper Payment Limit (UPL) templates or must the data from state-developed UPL reports/workbooks be mapped through, for example, V-Look-ups into the UPL templates?
Yes. Mapping data, through V-Look-ups, for example, is a much easier and consistent process for current and future UPL submissions. However, a state may choose to type information and data into unlocked fields in the UPL templates. When a state chooses to input data directly (not through a V-Look-up) into the template, it still must provide the supporting documentation with the source data. Additionally, the state should explain how it mapped data from the supporting documentation into the template. The Centers for Medicare & Medicaid Services utilizes the supporting information to confirm that the information in the templates is correct.
FAQ ID:92451
SHARE URLWhat is the Precertification Pilot?
The Precertification Pilot was an experiment conducted from October 2017-March 2018 designed to streamline certification and attract new vendors. Unfortunately, the pilot was found to be unscalable across Medicaid. However, key learnings from the pilot will be incorporated into current processes and future experiments around vendor engagement, certification, scalability, and sustainability. The goals the Centers from Medicare & Medicaid Services (CMS) identified at the beginning of the Precertification Pilot process remain the same: reduce the level of effort of certification; shorten the certification timeline; promote modularity and interoperability; reduce risk of system failure; and attract new vendors to the Medicaid IT market. Contact CMS with your ideas for experiments to achieve those goals at MES@cms.hhs.gov.
FAQ ID:95151
SHARE URLPlease clarify that state flexibility to reimburse in the aggregate extends to reimbursement rates for I/T/U pharmacies and FSS drugs, and that states can establish rates that are based on a variety of data sources, which may include FSS prices, national and State price surveys, AMP data, and other price benchmarks.
The new AAC requirements were designed to more accurately reflect the pharmacy providers' actual prices paid to acquire drugs and the professional services required to fill a prescription. We agree that each state is able to establish rates that satisfy (or are consistent with) AAC and may be based on a variety of data sources, which may include FSS prices, and other pricing benchmarks.
FAQ ID:95111
SHARE URLIf we complete multiple inpatient templates for Diagnosis Related Groups (DRG) and per diem, should they be in the same file or separate files? Should there be a summary of all the inpatient Upper Payment Limits (UPLs) showing grand totals?
The state should complete one template each for the DRG and per diem UPL calculations and these should be placed in one file. The state should also include a summary worksheet in the same file that shows the UPL gap for each ownership category (state government owned, non-state government owned, and private). States should include all necessary supporting documentation.
FAQ ID:92276
SHARE URLThe Inpatient Hospital Services (IPH), Outpatient Hospital Services (OPH), and Nursing Facility (NF) templates do not include fields to sum the Upper Payment Limit (UPL) gap by ownership category (private, Non-State Governmental Organization (NSGO), State Government Ownded (SGO). How should these totals be presented in the template?
The total UPL gap by ownership category can be shown by inserting a new tab in the file with these calculations, unless a summary worksheet is already included in the workbook. If there are any questions about how to add this tab, please reach out to your CMS Regional Office or send a follow-up question (with your template) to the UPL mailbox and additional guidance will be provided.
FAQ ID:92281
SHARE URLOne of the required fields in the Nursing Facility template is the Medicare Provider Number (Medicare Certification Number - Variable 112), but not all facilities are Medicare certified. How should data be entered for these facilities since it is a required field?
When a Medicare provider number is not available, such as for some nursing facilities, the state should populate variable 112 using the acronym NMC, which stands for "Not Medicare Certified". Adding this information will help to clearly identify the facility's status.
FAQ ID:92286
SHARE URL